Hexagonal bolt with thread up to the head
ISO 4017 steel 8.8 Dokka hdg with certificate 3.1
Q/SCR-I4017-8.8U-(HDG)-M24X80+3.1
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The bolts are ISO-compliant after hot-dip galvanisation.
- The bolts must not be used with nuts that have an oversized thread. This can create problems in the bolted joint and may cause the connection to fail.
ISO 4017 replaces DIN 933 | There is some similarity | Nominal size extended | Width across flats for M10, M12, M14 and M22 changed.
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 80 mm |
Head height (k1) | 15 mm |
External drive (s1) | WS36 |
Standards | ISO 4017 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread design | Full thread |
Product class | A |
EC declaration of conformity (CE) | No |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/
Documents
Last viewed
Intermediate layer for ISO D clamping system
Hard wax
Serrated lock washer, externally serrated, shape A DIN 6798, zinc-plated steel, blue passivated (A2K). Externally serrated
Tex-Rein cleaning cloth
Indexable insert carbide CNMG (medium machining)
T-handle 2-component hex key with side drive
Oval escutcheon blind
Half face mask HM 175
Cooling system tester with inflatable sealing bladder
Hexagonal nut with clamping piece (non-metal insert)
