Hexagonal bolt with thread up to the head
ISO 4017 steel 8.8 Dokka hdg with certificate 3.1
Q/SCR-I4017-8.8U-(HDG)-M30X110+3.1
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The bolts are ISO-compliant after hot-dip galvanisation.
- The bolts must not be used with nuts that have an oversized thread. This can create problems in the bolted joint and may cause the connection to fail.
ISO 4017 replaces DIN 933 | There is some similarity | Nominal size extended | Width across flats for M10, M12, M14 and M22 changed.
 | |
Thread type x nominal diameter (d1) | M30 |
Length (l1) | 110 mm |
Head height (k1) | 18.7 mm |
External drive (s1) | WS46 |
Standards | ISO 4017 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread design | Full thread |
Product class | A |
EC declaration of conformity (CE) | No |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Mechanic's glove Ansell Edge 48-125 48-126
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
SMART STEP EU+ HSS twist drill bit DIN 338
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Paint spray, silk gloss
Work jacket
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Expansion screw
Low-cut safety shoes, S3
Threaded pipe fittings
