Hexagonal bolt with thread up to the head
ASME B18.2.1 stainless steel 18-8 plain UNC
SCR-HCS-FT-(18-8)-1_8X3 1/2
Register now and access more than 125,000 products
The thread length deviates from the standard ASME B18.2.1 thread to head
1 INCH (in) = 25.4 mm
FT = full thread
18-8 is comparable with A2 stainless steel. The mechanical properties are based on ASTM F593
Datasheets(X)
 | |
Nominal diameter (d1) | 1 in |
Length (kl1) | 3 1/2 in |
Width across flats (s1) | 1 1/2 inch |
External drive | WS1 1/2 |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Head type | Hexagon head |
Thread type | UNC |
Last viewed
Work jacket Kübler Activiq 1250 5365
Identification rings, PVC
Twist drill bit HSS DIN 1897 type RN
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Twist drill bit, metal Ruko DIN 338 type VA HSCo plain 36°
Fitting Brass, 15007
Hard hat uvex pheos alpine
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Vertical clamp Basic With horizontal base and oil-resistant plastic handle