Hexagonal bolt with thread up to the head
ASME B18.2.1 stainless steel 18-8 plain UNC
SCR-MS-HEX-(18-8)-8_32X5/16
Register now and access more than 125,000 products
The thread length deviates from the standard ASME B18.2.1 thread to head
1 INCH (in) = 25.4 mm
FT = full thread
18-8 is comparable with A2 stainless steel. The mechanical properties are based on ASTM F593
Datasheets(X)
 | |
Nominal diameter (d1) | 0.164 in |
Length (kl1) | 0.3125 in |
Width across flats (s1) | 1/4 inch |
External drive | WS1/4 |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Head type | Hexagon head |
Thread type | UNC |
Last viewed
BOLTEX rust remover
SlideLine 55 Plus inset guide latch set For inset sliding wooden doors
Protective glove
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
MG-ZD 11 designer furniture handle
Fitting, tapered sealing, with female and male thread EN10242 U12, hot-dip galvanised malleable iron
Circlip shape JV for bore
Countersunk head screw with hexagon socket, full thread ISO 10642, brass, plain
Fine-tooth ratchet with plug-in torque wrench head drive Stahlwille 735
Non-woven sanding belt Klingspor NBS 800