Hexagonal nut ISO 4032 steel 10, hot-dip galvanised (HDG)
ISO 4032 steel 10 hot dip galvanized
NUT-HEX-ISO4032-10-(HDG)-WS46-M30
Register now and access more than 125,000 products
ISO 4032 replaces DIN 934 | There is no similarity | Nominal diameter changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | Only for standard thread | Fine thread moved to ISO 8673.
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M30 |
Height (m1) | 25.6 mm |
External drive (s1) | WS46 |
Standards | ISO 4032 |
Material | Steel |
Property class | 10 |
Hardness category | 0 - not applicable |
Surface | Hot dip galvanized |
Regulated area | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Ring-shaped crimp cable lug DIN 46234 and similar
Compartment dividers For system drawers
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Stop for Insert 3D hinge series jig
Hexagonal bolt with thread up to the head
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Work shirt, short sleeves 0300-12-00
Plus Quadro-L Vario hammer drill bit
Work trousers
Perforated panel For installing brackets