Hexagonal nut, high profile with clamping piece (non-metal insert) DIN 982, steel 10, zinc-plated, blue passivated (A2K)
DIN 982 steel 10 zinc plated
NUT-HEX-SLOK-DIN982-10-WS36-(A2K)-M24
Register now and access more than 125,000 products
DIN 982 has been withdrawn and replaced by ISO 7040. There is some limited similarity (Threads M7, M18, M22 removed | Threads M3, M4, M30 and M36 were additionally included | Nut height changed | Width across flats for threads M10, M12 and M14 changed to 16 mm, 18 mm and 21 mm | Fine thread was included in ISO 10512 | Strength class 12 removed | ISO 7040 valid for strength classes 5, 8, 10).
 | |
Thread type x nominal diameter (D) | M24 |
Height (h1) | 28 mm |
External drive (s1) | WS36 |
Standards | DIN 982 |
Material | Steel |
Property class | 10 |
Surface | Zinc plated |
RoHS-compliant | Yes |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Datasheets(X)
Last viewed
Tab washer, external tab DIN 432, zinc-plated steel, blue passivated (A2K)
Low-cut safety shoes, S1
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
System insert 4.4.1, combination wrench
KL draw bolt For M12-M63 and PG9-PG48 hole punchers
Bonded anchor glass capsule W-VPZ
Countersunk head screw
High-visibility jacket
Door panel removal lever
VS TAL Broom Rack broom cupboard rack Four levels
