Hexagonal nut, imperial
ASME B18.2.2 steel GR5 zinc plated UNF
NUT-HX-FIN-GR5-(ZN)-1 3/4_12
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1-3/4 in |
Height (m1) | 1.460 in |
Width across flats (s1) | 2 5/8 inch |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated |
Thread type | UNF |
Number of thread starts per inch | 12 |
Last viewed
Hammer drill bit Plus Duo-S Vario
TIPP® EXPRESS pipe clamp with joint
Hexalobular-type cheese head screw ISO 14579, steel 8.8, zinc-plated, blue passivated (A2K)
Work dungarees
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
HSS bimetal cylinder saw
Stretch X trousers
2-component thick-film lacquer
Turn-lock fastener