Hexagonal nut, imperial
ASME B18.2.2 steel GR5 zinc plated UNC
NUT-HX-FIN-GR5-(ZN)-1 3/4_5
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1-3/4 in |
Height (m1) | 1.500 in |
Width across flats (s1) | 2 5/8 inch |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated |
Thread type | UNC |
Number of thread starts per inch | 5 |
Other standard | 0 - not applicable |
Last viewed
Hexagonal bolt with thread up to the head
Threaded fitting
Transport cover
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Protective glove, synthetic
Tipp® VDS loop hanger For fastening sprinkler lines in fixed water-based fire extinguishing systems according to VdS guidelines
Y-hose connector
Threaded fitting
Silicone spray
Fixanchor W-FAZ PRO/A4