Hexagonal nut, imperial
ASME B18.2.2 steel GR5 zinc plated UNF
NUT-HX-FIN-GR5-(ZN)-1_12
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1 in |
Height (m1) | 0.887 in |
Width across flats (s1) | 1 1/2 inch |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated |
Thread type | UNF |
Number of thread starts per inch | 12 |
Other standard | 0 - not applicable |
Last viewed
Work jacket
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Ring lock washer Wide shape
pias® drilling screw, round head with collar and AW drive
Brass, metric lock nut in accordance with EN 60423 for EMC cable glands
Rapid SML connector
Threaded rod DIN 976, A2-70 stainless steel, shape A
Conical washer