Hexagonal nut, low profile ISO 4035 steel 04, hot-dip galvanised (HDG)
ISO 4035 steel 04 hot dip galvanized
NUT-HEX-ISO4035-04-WS13-(HDG)-M8
Register now and access more than 125,000 products
ISO 4035 replaces DIN 439-2 (with chamfer) | There is some similarity | Strength class for stainless steels changed from 50 to 025 and from 70 to 035 | Width across flats changed for M10, M12, M14, M22 | Nominal diameter M1.8 removed | ISO 4035 only regulates standard thread | Fine thread moved to ISO 8675.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (D) | M8 |
Height (m1) | 4 mm |
External drive (s1) | WS13 |
Standards | ISO 4035 |
Material | Steel |
Property class | 04 |
Surface | Hot dip galvanized |
Hardness category | 0 - not applicable |
Design | 0 - not applicable |
Drive type | Outer hexagon |
Product class | A |
Thread type | Metric thread |
Thread form | Standard metric thread |
RoHS-compliant | Yes |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Centre-grooved dowel pins ISO 8742 steel plain
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3026
Hexagon nut DIN 934, A4 stainless steel, plain
Manual taper tap Ruko hand tap HSS DIN 352 UNC taper tap
Low-cut safety shoes, S1
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
Protective jaw Prism
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262