Hexagonal nut, low profile ISO 4035 steel FK05, zinc flake silver (ZFSHL)
ISO 4035 steel 05, zinc-flake
NUT-HEX-ISO4035-05-WS30-(ZFSHL)-M20
Register now and access more than 125,000 products
Zinc flake coatings are chrome (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that require vehicle construction standard corrosion protection requirements.
The corrosion resistance of ZFHSL is as follows:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient.
- Adjusted friction coefficient range from 0.09μ - 0.14μ due to top coat with integrated lubricating particles
ISO 4035 replaces DIN 439-2 (with chamfer) | There is some similarity |Strength class for stainless steels changed from 50 to 025 and from 70 to 035 | Width across flats changed for M10, M12, M14, M22 | Nominal diameter for M1.8 removed | ISO 4035 only governs standard thread | Fine thread was moved to ISO 8675.
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (D) | M20 |
Height (m1) | 10 mm |
External drive (s1) | WS30 |
Standards | ISO 4035 |
Material | Steel |
Property class | 05 |
Surface | Flake zinc silver |
Hardness category | 0 - not applicable |
Corrosion protection period | 720 h |
Design | 0 - not applicable |
Drive type | Outer hexagon |
Product class | B |
Thread type | Metric thread |
Thread form | Standard metric thread |
RoHS-compliant | Yes |
Last viewed
Recessed LED light EBL-24-11 For recessed installation
Quick-release service coupling
V-neck pullover
ASSY® 4 A2 CS fittings screw A2 stainless steel plain full thread countersunk head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
ASME B18.21.1 steel zinc-plated
Lightweight nut with flange
Article sticker
Lower ladder section For aluminium rope-operated ladders
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised