Hexagonal nut, low profile with clamping piece (non-metal insert), imperial
ASME B18.16.6 GR2 zc-plt steel UNC
NUT-HX-NYL-INS-NTE-N2-(ZN)-1/2_13
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
The mechanical properties are set out in ASME B18.16.6
Standard thread tolerance as per ASME B1.1 = 2B (for female threads)
Datasheets(X)
 | |
Nominal diameter | 1/2 in |
Material | Steel |
Property class | GRA |
Surface | Zinc plated |
ASME | 0 - not applicable |
Thread type | UNC |
Number of thread starts per inch | 13 |
Last viewed
Work trousers
Screw-on pin For furniture castors with mount type W
ASME B18.8.2 steel plain
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Cut protection glove Uvex athletic C XP
Profile half cylinder EPS
Threaded rod
Cetus work dungarees
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
Wiring duct VKW standard without approval