Hexagonal nut with clamping piece (all-metal) ISO 7042, steel 8, hot-dip galvanised (hdg)
ISO 7042 steel 8 hot dip galvanized
NUT-HEX-SLOK-ISO7042-8-WS41-(HDG)-M27
Register now and access more than 125,000 products
ISO 7042 replaces DIN 980, DIN 6925 | There is some limited similarity | Threads M3, M4, M7, M18, M22, M27, M33 and M39 removed | Nut height changed | Width across flats for M10, M12 and M14 changed to 16 mm, 18 mm and 21 mm | Fine thread included in ISO 10513 | ISO 7042 valid for strength classes 5, 8, 10, 12.
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M27 |
Height (m1) | 27 mm |
External drive (s1) | WS41 |
Standards | ISO 7042 |
Material | Steel |
Property class | 8 |
Surface | Hot dip galvanized |
Locking device operating principle | Single part clamping nut metal |
Locking function | Locking against loosening by clamping |
Thread type | Metric thread |
Thread form | Standard metric thread |
RoHS-compliant | Yes |
Last viewed
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Concrete screw with countersunk head W-BS 2/A4 type CS
Cylindrical pin, hardened DIN 6325, steel, plain
Safety boots, S2
Cam buckle strap One piece
90° angled cutting ring fitting ISO 8434-1, stainless steel 1.4571
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Twist drill bit HSS DIN 338 type RN 118°
Internal thread anchor W-VI-IG, A4 stainless steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
DUO-S impact drill bit with straight shank