Hexagonal nut with flange and clamping piece (all-metal)
EN 1664 steel 8 zn ptd. thick-layer pass. sealing
NUT-HEX-FLG-EN1664-8-WS18-(ZSML)-M12
Register now and access more than 125,000 products
Connection elements with a galvanised chrome (VI)-free zinc-nickel coating (ZSML) offer a more future-proof alternative compared to surfaces containing chrome(VI). The coating consists of a zinc layer with passivation on a (chrome III) basis and sealing coat (top coat with integrated lubricating particles).
Overview of advantages:
- Higher quality replacement of common galvanised coatings such as A2C or A3C
- Adjusted friction coefficient range from 0.09 μ - 0.14 μ due to top coat with integrated lubricating particles
- Thermal capacity up to 120°C
- Even layer distribution
- Functional and decorative
ISO EN 1664 replaces DIN 6927 | There is some limited similarity | Nuts with fine thread included in DIN EN 1667 | Nut height changed | Width across flats for size M10 changed from 15 mm to 16 mm.
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M12 |
Height (h1) | 12.57 mm |
Flange diameter (dc) | 26 mm |
External drive (s1) | WS18 |
Standards | EN 1664 |
Material | Steel |
Property class | 8 |
Surface | Zinc plated thick-layer passivation |
RoHS-compliant | Yes |
Locking device operating principle | Single part clamping nut metal |
Locking function | Locking against loosening by clamping |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, thick-film passivated (ZSML)
Knob cylinder 3KS
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Weld-in bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
Moldex glasses holder 9998
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
90° angled male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread
V-groove cutter for wood
ProBase type C post support bracket