Hexalobular screw with flattened half round head and collar
DIN 34805-2 steel 010.9, plain TX
SCR-DIN34805/2-010.9-TX30-M6X16
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 898-1
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 16 mm |
Head diameter (dc) | 13.6 mm |
Head height (k1) | 3.3 mm |
Internal drive | TX30 |
Standards | DIN 34805-2 |
Material | Steel |
Property class | 010.9 |
Surface | Plain |
Head type | Button head with collar |
Head details | With collar |
Drive type | Internal hexalobular |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Product class | A |
RoHS-compliant | Yes |
Last viewed
Double-ended socket wrench
Phillips and slotted bit, plus/minus
Pocket tape measure with plastic housing
Tyre repair system Pneusil
TIPP® Smartlock GS pipe clamp
Twist drill bit HSCo DIN 1897 type RN MAGMA
Compact workshop trolley
High-visibility vest Neon
Tool head, small design For crimping pliers
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain