Hexalobular screw with flattened half round head and collar
ISO 7380-2 A2 stainless steel plain TX
SCR-ISO7380/2-A2/070-TX25-M5X60
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 3506-1
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 60 mm |
Head diameter (dc) | 11.8 mm |
Head height (k1) | 3 mm |
Internal drive | TX25 |
Standards | DIN 34805-2 |
Material | Stainless steel A2 |
Property class | 070 |
Surface | Plain |
Head type | Button head with collar |
Head details | With collar |
Drive type | Internal hexalobular |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Product class | A |
RoHS-compliant | Yes |
Last viewed
Wing screw, square wings Similar to DIN 316, A4 stainless steel, plain, pressed
EPS profile thumbturn cylinder
Particulate filter P3R 903201 Moldex
Cover Storage box W-KLT 2.0 XS small container
Stud with threaded end ≈ 1.25 d and fine thread DIN 939, steel 8.8, plain
Hood for rain jacket
Nagel collated for pin driver
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Twist drill bit HSCo DIN 340 type RN OXIDE
Hexagonal bolt with shank