Hexalobular-type cheese head screw, low head
ISO 14580 steel 10.9 zinc plated
SCR-CYL-ISO14580-10.9-TX25-(A2K)-M5X16
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, connection elements with hexalobular heads are standardised and can be used all over the world
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 16 mm |
Head diameter (dk) | 8.5 mm |
Head height (k1) | 3.65 mm |
Standards | ISO 14580 |
Material | Steel |
Property class | 10.9 |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Socket low head |
Drive type | Internal hexalobular |
Internal drive | TX25 |
Thread type | Metric thread |
Pitch | 0.8 mm |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Paint spray, high gloss
Tile cutter FS 1350-12 G
Door holding clasps
Cable grommet with membrane CR
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Tungsten carbide bur with aluminium teeth
WÜPOFAST® black oxide chipboard screw Steel, browned, full thread, countersunk head, PZ
Contact spray SW
Straight reducer fitting ISO 8434-1, stainless steel 1.4571
Round-head nail NK 700 With steel washer