Hexalobular-type cheese head screw, low head
ISO 14580 steel 8.8 zinc plated
SCR-CYL-ISO14580-8.8-TX8-(A2K)-M2,5X10
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, connection elements with hexalobular heads are standardised and can be used all over the world
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M2.5 |
Head diameter (dk) | 4.5 mm |
Head height (k1) | 1.85 mm |
Standards | ISO 14580 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Socket low head |
Drive type | Internal hexalobular |
Internal drive | TX8 |
Thread type | Metric thread |
Pitch | 0.45 mm |
Thread form | Standard metric thread |
Last viewed
Tyre inflator with analogue calibration with 2C handle
Cover cap for screws with head recess
Hexalobular-type cheese head screw, low head
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Hole saw Ruko carbide flat cut
Solid carbide end mill, twin blade with reinforced shank
HSCo8 end mill, long DIN 844L
Blancomili tap
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel