Hexalobular-type cheese head screw, low head
ISO 14580 stainless steel, A2, plain
SCR-CYL-ISO14580-A2/70-TX10-M3X3
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, connection elements with hexalobular heads are standardised and can be used all over the world
Datasheets(X)
Last viewed
ISO 15979 Blind rivet assortment, round pan head In system case 4.4.1. Steel, zinc-plated, blue passivated
Drilling jig For security door fittings with long plate
1/2-inch impact socket wrench assortment 12 pieces
TIPP® fixed point bracket 2 pieces
Hexagonal bolt with thread up to head for pressure container construction ISO 4017, steel 5.6, plain
Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352
EPS profile thumbturn cylinder
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
Protective gloves, knitted