Hexalobular-type cheese head screw, low head
ISO 14580 stainless steel, A2, plain
SHR-ZYL-ISO14580-A2/70-TX15-M3,5X10
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, connection elements with hexalobular heads are standardised and can be used all over the world
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M3.5 |
Length (l1) | 10 mm |
Head diameter (dk) | 6 mm |
Head height (k1) | 2.6 mm |
Standards | ISO 14580 |
Material | Stainless steel A2 |
Property class | 70 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Socket low head |
Drive type | Internal hexalobular |
Internal drive | TX15 |
Thread type | Metric thread |
Pitch | 0.6 mm |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 5.6, zinc-plated thick-film passivated (ZSML)
Work shirt
Spring cotter pin With double loop, zinc-plated steel
Grooved ball bearings, POP FAG
VARIFIX® connection bracket, 90°, pre-assembled
Wad punch For round eyelets
TIME-SERT® threaded bushing
Joint mortar CERAfix® 506 For natural-stone and ceramic floor and wall coverings from 1-10 mm
Work dungarees
Jacket Planam MG 260