High-strength bearing retainer - BEARRTNGCOMPD-DOS-HSTRTH-25G

High-strength bearing retainer - BEARRTNGCOMPD-DOS-HSTRTH-25G - 1

High-strength bearing retainer - BEARRTNGCOMPD-DOS-HSTRTH-25G - 2

High-strength bearing retainer

Name: High-strength bearing retainer
Brand: Würth
SKU: 0893603025

Bearing retaining compound high-strength
BEARRTNGCOMPD-DOS-HSTRTH-25G

Art.-no. 0893603025

EAN 4024835812504

All versions

Similar products

Prices for customers after login

High-strength bearing retainer

Art.-no. 0893603025

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For high-strength connection of cylindrical parts subject to high loads

Reliable hardening at low temperatures around 0°C

Assists in winter use

High degree of gap bridging

Completely fills extensive surface roughnesses

Gap filling capacity of 0.15 mm

Even extremely large deviations are cost effective to correct.

Prevents frictional corrosion

The bearings will not seize up.

Resistant to a large number of bases, gases, solvents, oils and fuels

Silicone-free, solvent-free and oil-free

DOS system:

Practical one-handed operation thanks to the clever turn-lock nozzle

One hand always remains free.

Continuously adjustable dispensing system

Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck

Costs optimised thanks to emptying with virtually no remaining product

Notice

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. We always recommend that you conduct your own tests.

NSF-registered, Class S5, bearing retaining compound

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water up to +82°C

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For high-strength securing of cylindrical joining parts such as bushings and sleeves as supplied, ball bearings, oil-impregnated sinter bronze, gears, bolts, shaft and hub connections exposed to high loads.

The bearing retaining compound is designed for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, electrical and electronics construction, food, beverage, pharmaceutical and paper industries, etc.

Instructions

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.

For more information, please refer to the technical data sheet.

Weight of content	25 g
Chemical basis	Methacrylic acid ether
Colour	Green
Density/conditions	1.07 g/cm³ / in accordance with DIN EN ISO 2811-1
Suitable for max. thread	M12
Max. gap-filling ability	0.15 mm
Min./max. viscosity /conditions	100-200 mPas / at 25°C, Brookfield RVT, spindle 2/20 rpm
Fully hardening/curing conditions	Exclusion of oxygen and contact with metal (copper or iron ions)
Min./max. initial strength	5-10 min
Min./max. functional strength	30-40 min
Min./max. final strength	3 h-6 h
Min./max. processing temperature	5 to 35 °C
Min./max. temperature conditions	-55 to 150 °C
Min. flashing point	90 °C
Min. prevail torque	35 Nm
Conditions for prevail torque	DIN EN 15865
Shelf life from production/conditions	18 Month / at room temperature
Solvent-free	Yes
Silicone-free	Yes

Additional accessory:

Product

Description

Quantity

Price
/PU

Metal cleaner

METCLNR-500ML

Art.-no. 0890107063

Special cleaner for pre-cleaning in connection with anaerobic adhesive applications such as screw and bearing locking, surface and pipe sealant

Acetone cleaner for cleaning and degreasing parts of all kinds

ACETONCLNR-METCLNR-250ML

Art.-no. 0893460

x 1 pcs

Tex-Rein cleaning cloth

CLNCLTH-(TEX-REIN)-27X38CM-150PCS

Art.-no. 0899810

Extra fine cleaning cloth for dust and lint-sensitive areas

x 4 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).