Holder, die Ruko DIN 225
Threading die holder DIN 225 Ruko
HOLD-THRDIE-RUKO-24210536-HSS-M54-M63
Register now and access more than 125,000 products
With steel handles, one handle can be unscrewed and 5 screws for securing the die.
Design: Die-cast zinc housing
Material | Die-cast zinc |
Length | 930 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Castellated nut, low profile with fine thread DIN 979, steel 5, zinc-plated, blue passivated (A2K)
Work dungarees
Bodywork file blade
Base height adjuster, type C Press-fit
Tipp® VDS loop hanger For fastening sprinkler lines in fixed water-based fire extinguishing systems according to VdS guidelines
Façade membrane STAMISOL PERFORM FI 2 TAPE
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Stretch X trousers
Divider assortment With compartment rails and compartment dividers for system dimensions 16.8
Cable gland
