Hole puncher With three cutting tips for punching out holes
Hole puncher with draw bolt
HOPNCH-TENSSCR-D31,7MM
Register now and access more than 125,000 products
3 cutting tips
- Less deformation of the material being punched
- No sticking at the draw bolt
- No damage to the screw thread
- Improved support
4 notches on the die
Precise alignment with the cross line
Can be used in steel (St37), aluminium, copper and plastics up to a material thickness of max. 2.0 mm
Datasheets(X)
For stainless steel sinks
Diameter | 31.7 mm |
Drill diameter | 10.0 mm |
Suitable for max. sheet metal thickness | 2.0 mm |
Material to be processed | Steel, Aluminium, Copper, Plastic |
Last viewed
Safety boots, S2
EPS profile thumbturn cylinder
Adapter cable Sundström T09-0002
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Hexagon nut, low profile ISO 4035 steel 04, zinc-plated blue passivated (A2K)
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Brake calliper socket wrench insert For MAN TGA/Atego 12 t
Knife blade Martor industrial blade no. 83715
Work dungarees