Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hole puncher splitting punch KL bolt
HOPNCH-TENSSCR-M63
Register now and access more than 125,000 products
With ball bearing draw bolt
Plastic-encapsulated ball bearing draw bolt provides protection against dirt and ensures a longer service life.
Long service life
Newly developed cutting geometry
3x splitting of the material in the die — no punching waste sticks to the draw bolt, guaranteed even tool wear and precise, burr-free, circular holes.
Precise alignment at the cross line
Four notches on the die
Diameter for control elements (buttons, switches, indicator lights): 30.5 mm
For draw bolt Ø 19.0 mm, pre-punching is also possible with sheet metal puncher size M20 (PG 13.5) as an alternative.
For pre-drilling: HSS twist drill, art. no. 0624...
For greasing the draw bolt: AL 1100 art. no. 0893 110 1
Datasheets(X)
Diameter | 63.5 mm |
Thread type x nominal diameter | M63 |
Screw diameter x screw length | 19 x 75 mm |
Drill diameter | 19.5 mm |
Suitable for max. sheet metal thickness | 3 mm |
Type description | Delivery overview, splitting punch M12-M63, metric ISO sizes in accordance with EN 50262 |
Material to be processed | Steel |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Metal workshop oiler
ASSY®plus VG 4 CH construction screw Steel zinc plated full thread cylinder head
Pine tree clip Type 9
Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204
Cetus softshell jacket
Wood screw, DIN 95 brass Raised countersunk head, slotted
Jacket Planam Plaline
Intermediate layer for ISO S clamping system
Colour – blind rivets Round pan head
Connection line Made of plastic, for LED-T-12-5 LED transformer