Hole saw Ruko HSS-G plain
Hole saw HSS-G plain Ruko
HOSAW-RUKO-128016-HSS-D16
Register now and access more than 125,000 products
RUKO HSS-G hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for steel (up to 800 N/mm²) and cast steel, non-ferrous and light metals up to 2.5 mm, as well as plastics, reinforced fabrics, gypsum and lightweight panels up to max. 5.0 mm.
Diameter (Ø) | 16.0 mm |
Drilling depth | 5.0 mm |
Last viewed
ASSY®plus 4 A4 SRCS TERRACE terrace construction screw A4 stainless steel plain partial thread raised countersunk head
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Bit box, size 1 9 pieces
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3769
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
E90 fire protection duct
Wire end ferrule with plastic sleeve
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Y-connector, PA6 MOD BS SGA
Washer ISO 7090 steel 200 HV plain