Hole saw Ruko HSS-G plain
Hole saw HSS-G plain Ruko
HOSAW-RUKO-128044-HSS-D44
Register now and access more than 125,000 products
RUKO HSS-G hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for steel (up to 800 N/mm²) and cast steel, non-ferrous and light metals up to 2.5 mm, as well as plastics, reinforced fabrics, gypsum and lightweight panels up to max. 5.0 mm.
Diameter (Ø) | 44.0 mm |
Drilling depth | 5.0 mm |
Last viewed
Stud screw Zinc-plated steel
Cylindrical pin, hardened DIN 6325, steel, plain
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Concealed hinge, TIOMOS Impresso 110/30 A With integrated damping, three damping settings available
Hammer drill bit Plus Quadro-S
Aerated concrete clamp, HIT
Jacket Planam Highline ladies'
Work pullover
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Threaded fitting