Hole saw Ruko bimetal HSCo8 with fine toothing
Hole saw bimetal HSCo8 with fine toothing Ruko
HOSAW-RUKO-126020-HSSE-CO8-D20
Register now and access more than 125,000 products
The fine toothing is particularly well suited to metals. It ensures smoother running and less effort. The reduced heat development during cutting increases the tool life, especially in the case of metals.
RUKO bimetal hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for unalloyed and alloyed steels (up to 1000 N/mm² strength), high-chromium alloy steels such as VA, rust and acid-resistant steels, non-ferrous and light metals.
Diameter (Ø) | 20.0 mm |
Drilling depth | 38 mm |
Last viewed
Basket sets for wall cupboard pull-outs
High-performance anchor with threaded bolt
Work dungarees
E 6.3 TX bit (1/4 inch) E 6.3 (1/4 inch)
ASSY® 3.0 zinc-nickel-plated timber screw
Twist drill bit HSCo DIN 338 MFD Speed
Square escutcheon handle pair
Single-handed grease gun With variable pressure setting directly on handle
Plastic expanding rivet with cap, with multiple slits
Battery charging cabinets with hinged doors