Hole saw Ruko bimetal HSCo8 with fine toothing
Hole saw bimetal HSCo8 with fine toothing Ruko
HOSAW-RUKO-126021-HSSE-CO8-D21
Register now and access more than 125,000 products
The fine toothing is particularly well suited to metals. It ensures smoother running and less effort. The reduced heat development during cutting increases the tool life, especially in the case of metals.
RUKO bimetal hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for unalloyed and alloyed steels (up to 1000 N/mm² strength), high-chromium alloy steels such as VA, rust and acid-resistant steels, non-ferrous and light metals.
Diameter (Ø) | 21 mm |
Drilling depth | 38 mm |
Last viewed
Support shim
Tapping screw, countersunk head
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Metric ratchet combination wrench with POWERDRIV®
Work trousers
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank
Neck protector
EPS key