Hole saw Ruko bimetal HSCo8 with fine toothing
Hole saw bimetal HSCo8 with fine toothing Ruko
HOSAW-RUKO-126025-HSSE-CO8-D25
Register now and access more than 125,000 products
The fine toothing is particularly well suited to metals. It ensures smoother running and less effort. The reduced heat development during cutting increases the tool life, especially in the case of metals.
RUKO bimetal hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for unalloyed and alloyed steels (up to 1000 N/mm² strength), high-chromium alloy steels such as VA, rust and acid-resistant steels, non-ferrous and light metals.
Diameter (Ø) | 25.0 mm |
Drilling depth | 38 mm |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Taper-grooved dowel pin DIN 1472, A1 stainless steel, plain
Hexagon Socket Head Cap Screw
Installation box shower tray flush-mounted mixer masonry
ORSY®BULL partition element basic set For dividing ORSY®BULL top loader boxes according to requirements
Synchronisation module For Dynapro Tipmatic full-extension concealed slide 40/60 kg
Hexagon nut
L-shaped push-in fitting with hexagon drive
Gas filter SR 518 A2 Sundström H02-7012
Stretch X trousers