Hole saw Ruko bimetal HSS with variable toothing
Hole saw bimetal HSS with varied toothing Ruko
HOSAW-RUKO-106016-HSS-D16
Register now and access more than 125,000 products
For easily machinable materials, the variable toothing ensures a more even cut and less effort. Due to the lower vibration and heat development during cutting, up to three times the service life is achieved.
RUKO bimetal hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for unalloyed steel (up to 700 N/mm² strength), non-ferrous and light metals, plastics, gypsum, lightweight panels, fibreboard, plywood and wood processing.
Diameter (Ø) | 16.0 mm |
Drilling depth | 38 mm |
Last viewed
Hexalobular-type cheese head screw, low head
Flat washer with chamfer ISO 7090, steel, 300 HV, zinc flake, silver (ZFSH)
Spade drill bit For wood
Hexagon head bolt with full thread for pressure container construction (PED) ISO 4017, steel 25CrMo4, plain
Tapered pin ISO 2339 A1 stainless steel, shape A ground
Ring-shank roofing nail 20°, type HN With grooved shank. A2 stainless steel, plain
Threaded pin DIN 551, A1 stainless steel, plain
Injector extractor set 2.1 L, 2.2 L, 3.0 V6 Mercedes, Chrysler 7 pieces
EPS profile thumbturn cylinder
Hexagonal bolt with thread up to the head