Hole saw Ruko bimetal HSS with variable toothing
Hole saw bimetal HSS with varied toothing Ruko
HOSAW-RUKO-106020-HSS-D20
Register now and access more than 125,000 products
For easily machinable materials, the variable toothing ensures a more even cut and less effort. Due to the lower vibration and heat development during cutting, up to three times the service life is achieved.
RUKO bimetal hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for unalloyed steel (up to 700 N/mm² strength), non-ferrous and light metals, plastics, gypsum, lightweight panels, fibreboard, plywood and wood processing.
Diameter (Ø) | 20.0 mm |
Drilling depth | 38 mm |
Last viewed
Safety boots, S1
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
Hexagon head drilling screw
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S3
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Cutting disc for steel
Handle plate on outer plate
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Screw with flattened half round head and hexagon socket ISO 7380-1 steel 010.9, plain