Hole saw Ruko bimetal HSS with variable toothing
Hole saw bimetal HSS with varied toothing Ruko
HOSAW-RUKO-106025-HSS-D25
Register now and access more than 125,000 products
For easily machinable materials, the variable toothing ensures a more even cut and less effort. Due to the lower vibration and heat development during cutting, up to three times the service life is achieved.
RUKO bimetal hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for unalloyed steel (up to 700 N/mm² strength), non-ferrous and light metals, plastics, gypsum, lightweight panels, fibreboard, plywood and wood processing.
Diameter (Ø) | 25.0 mm |
Drilling depth | 38 mm |
Last viewed
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Wire feed roller For MM 350 welding systems
Euraseal U-100 universal window sealing tape
Cetus softshell jacket
ABS Lock III support tube
Hexagonal bolt with thread up to the head
Thin-walled heat-shrink hose Without internal adhesive
EPS profile thumbturn cylinder
EPS profile double cylinder
Cylindrical grooved pin with chamfer ISO 8740, steel, plain