Hole saw Ruko carbide flat cut
Hole saw tungsten carbide shallow cut Ruko
HOSAW-RUKO-105255-1-TC-D25,5
Register now and access more than 125,000 products
RUKO carbide hole saws can be used in hand and upright drills. For upright drills, please use only manual feed.
Datasheets(X)
Suitable for high-chromium alloy steels such as V2A and V4A (up to 2.0 mm), steel and cast steel, non-ferrous and light metals, plastics, reinforced fabrics, gypsum and lightweight panels, wood processing up to max. 4.0 mm.
Diameter (Ø) | 25.5 mm |
Drilling depth | 10.0 mm |
Last viewed
Hexagonal bolt
34° half-head collated nails AN
Fixanchor internal thread W-FAZ-IG/S - push-through installation
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Concealed slide full-extension slide Dynapro With integrated soft-close system
ISO insert holder with S clamping system for SC indexable inserts
Hexagon Socket Head Cap Screw with metric fine pitch thread ISO 12474/DIN 912, steel 8.8, plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagonal bolt with shank and fine thread
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated