Hollow profile fastener BoxBolt® A4 stainless steel, with CE marking
BoxBolt hexagon stainless steel A4 CE
HLSECTFSTNR-BQ1S06-(5-29)-A4-M6-CE
Register now and access more than 125,000 products
The mechanical material properties of the screws correspond to strength class 70 in accordance with DIN EN ISO 3506-1
Never exceed the permissible working loads. Before using hollow section fasteners, always check that the steel structure can withstand the required loads.
ETA 20/1174
BoxBolt® is a registered trademark of Access Technologies Limited, GB.
Datasheets(X)
For fastening to hollow sections or other hard-to-reach components. The fastener is especially suitable for applications where the installation point is only accessible from one side.
The connection is produced by tightening the screw while bracing the sleeve collar, resulting in expansion of the sleeve. The tightening torques can be applied using a torque wrench. The hollow section fastener is only approved for one-time use!
We recommend the BoxSokTM special tool for installation
 | |
Thread type x nominal diameter | M6 |
Screw length (l) | 45 mm |
Width across flats (S) | 10 mm |
Width across flats, sleeve (SHü) | 18 mm |
Sleeve diameter (dHÜ) | 10.5 mm |
Collar thickness (kHü) | 5.4 mm |
Sleeve length (lHü) | 35 mm |
Min./max. grip length (lk) | 5-29 mm |
Nominal drill hole diameter | 11 mm |
Tightening torque | 13 Nm |
Min. hole distance (A) | 30 mm |
Min. edge clearance (B) | 11 mm |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
DIN 976-1 steel 8.8 zinc flake shape B
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Expansion roller For fabric, fleece and Trizact sanding sleeves, 100 x 100 mm
Round wire snap ring and snap ring groove for drill holes
Padlock 3KS PLUS
Vertical cable guide For desks
Hexagonal bolt with shank
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Cheese head screw with hexagon socket head and shoulder ISO 7379, A2-050 stainless steel, plain, tolerance f9