Hollow profile fastener BoxBolt^® HDG Steel, hot-dip galvanised, with CE marking

Name: Hollow profile fastener BoxBolt ® HDG Steel, hot-dip galvanised, with CE marking
Brand: Würth
SKU: 048591031

BoxBolt hexagon, steel, hot-dip galvanised CE
HLSECTFSTNR-BQ3G10-(35-63)-HDG-M10-CE

Art.-no. 048591031

EAN 4062856348527

All versions

Similar products

Prices for customers after login

Hollow profile fastener BoxBolt^® HDG Steel, hot-dip galvanised, with CE marking

Art.-no. 048591031

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

The mechanical material properties of the screws correspond to strength class 8.8 in accordance with DIN EN ISO 898-1

Notice

Never exceed the permissible working loads. Before using hollow section fasteners, always check that the steel structure can withstand the required loads.

ETA 20/1174

BoxBolt^® is a registered trademark of Access Technologies Limited, GB.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For fastening to hollow sections or other hard-to-reach components. The fastener is especially suitable for applications where the installation point is only accessible from one side.

Instructions

The connection is produced by tightening the screw while bracing the sleeve collar, resulting in expansion of the sleeve. The tightening torques can be applied using a torque wrench. The hollow section fastener is only approved for one-time use!

We recommend the BoxSok^TM special tool for installation.


Thread type x nominal diameter	M10
Screw length (l)	90 mm
Width across flats (S)	16 mm
Width across flats, sleeve (S_Hü)	24 mm
Sleeve diameter (d_HÜ)	17.5 mm
Collar thickness (k_Hü)	7.4 mm
Sleeve length (l_Hü)	80 mm
Min./max. grip length (l_k)	35-63 mm
Nominal drill hole diameter	18 mm
Tightening torque	45 Nm
Min. hole distance (A)	40 mm
Min. edge clearance (B)	15 mm
Material	Steel
Surface	Hot dip galvanized
RoHS-compliant	Yes

Required accessory:

Product

Description

Quantity

Price
/PU

BoxSok™ bolt socket head

PLGINTL-3/8IN-HEX-WS16

Art.-no. 071413 51

Special tool for mounting BoxBolt^® hollow profile fastener

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).