Hot protective wax
Hot protective wax
POLWAX-WASHSYS-HOT-25LTR
Register now and access more than 125,000 products
Produces a protective layer
- Protects the vehicle surface against corrosion, salt, UV-rays
- Allows rainwater to simply roll off
- Dirt is easier to remove
- Delays recontamination
High-quality components ensure an optimal shine
Well-kept appearance, looks as good new
Free of AOX and silicone
pH-value in the concentrate: 4–4.5
Free of mineral oils and hydrocarbons
Easily biodegradable in accordance with OECD*. Does not compromise the effectiveness of light fluid separators.
Store in a frost-free place! Avoid overdosing!
*OECD = Organisation for Economic Cooperation and Development
The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.
Datasheets(X)
In car washes:
Dispense undiluted into the hot-wash sprayer. Application concentration: approx. 0.2%
In high-pressure devices/self-service washing systems:
Stir 1 part hot protective wax to 9 parts water. Processing temperature: approx. +70°C to +80°C. Spray the product onto the clean vehicle while still wet; rinsing with cold water improves the flow behaviour and gloss pattern.
Chemical basis | Cationic surfactants |
Smell/fragrance | Characteristic |
Colour | Yellow |
pH value | 4 |
Conditions for pH value | at 20°C |
Density conditions | at 20°C |
Min. flashing point | 65 °C |
Density | 0.985 g/cm³ |
Min. processing temperature | 70 °C |
Max. processing temperature | 80 °C |
Application concentration | 0.2 % |
AOX-free | Yes |
Silicone-free | Yes |
Mineral oil-free | Yes |
Hydrocarbon-free | Yes |
Weight of content | 25.6 kg |
Contents | 25 l |
Last viewed
Double-ended socket wrench
Universal protector GPN 600 Polyethylene, natural
Work trousers Cetus
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
Protective glove, fabric
Slotted set screw with tip ISO 7434, A1 plain stainless steel
Drilling screw, flat head with AW drive and minipoint pias®
High-visibility trousers
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel