Hydraulic oil TRIATHLON<SUP>®</SUP> HLP - HYDROIL-HLP68-60LTR

Hydraulic oil TRIATHLON^® HLP

Name: Hydraulic oil TRIATHLON ® HLP
Brand: Würth
SKU: 0897668004

Hydraulic oil, TRIATHLON HLP
HYDROIL-HLP68-60LTR
TRIATHLON

Art.-no. 0897668004

EAN 4049557184319

All versions

Similar products

Prices for customers after login

Hydraulic oil TRIATHLON^® HLP

Art.-no. 0897668004

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

High-performance hydraulic oil compatible with all commercially available sealing compounds as well as steel, non-ferrous metals and light metals.

TRIATHLON hydraulic oils are produced and packaged in compliance with the most stringent quality specifications in accordance with DIN EN ISO 9001

High product safety

Extensive manufacturer approvals

Only high-quality first raffinates and raw materials are used in TRIATHLON oils

Satisfies key specifications of automotive manufacturers

Offers optimum wear protection under heavy loads

Notice

Follow the vehicle, gearbox and aggregate manufacturers’ specifications. However, full effectiveness only when used unmixed.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

High-performance hydraulic oil, compatible with all commercial sealants as well as steel, non-ferrous, and light metal rims.

Contents	60 l
Type of oil	Mineral
ISO-VG grade	68
Approved for hydraulic oils	DIN 51524-2
Shelf life from production	60 Month
Density	0.88 g/cm³
Density conditions	at 15°C
Min. flashing point	240 °C
Pour point	-22 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.