Hygienic design ball-head screw
Stainless steel 1.4404 polished hygienic design
SCR-1.4404-HYGDESIGN-WS8-POL-M5X25
Register now and access more than 125,000 products
- Optimum connection element for fastening panels
- Large head contact surface
- Visually appealing head geometry
- Easy to clean thanks to its polished surface
- Virtually no adhesion of dirt particles thanks to the extremely low surface roughness of < 0.8 µm
- Low distortion screwing in softer materials thanks to the large contact surface and the undercut on the threaded shank
Not compatible with Hygienic USIT® sealing washers and washers for dead space-free screw connections.
Datasheets(X)
 | |
Material | Stainless steel A4, 1.4404 |
Property class | 50 |
Surface | Plain |
Design | Polished Ra < 0,8 µm |
RoHS-compliant | Yes |
Area of application | For hygienic requirements |
Head type | Ball head |
Drive type | Two side |
Thread form | Standard metric thread |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 25 mm |
Head height (k1) | 4 mm |
Head diameter (dk) | 14 mm |
External drive (sw) | WS8 |
Radius (r1) | 8.5 |
Last viewed
Waterproof pin housing TE Superseal 1.5 series
Sanding disc Useit Superpad vehicle
Soft wax
High-visibility jacket
EPS profile thumbturn cylinder
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Sanding belt, fabric VSM XK870X
Sanding disc Useit Superpad vehicle
Hexagonal nut, flat profile DIN 936, steel, plain
Flat-head screw with H cross recess ISO 7045, steel 4.8, zinc-plated, blue passivated (A2K)