Hygienic design ball-head screw
Stainless steel 1.4404 polished hygienic design
SCR-HYGDESIGN-1.4404-WS10-POL-M6X16
Register now and access more than 125,000 products
- Optimum connection element for fastening panels
- Large head contact surface
- Visually appealing head geometry
- Easy to clean thanks to its polished surface
- Virtually no adhesion of dirt particles thanks to the extremely low surface roughness of < 0.8 µm
- Low distortion screwing in softer materials thanks to the large contact surface and the undercut on the threaded shank
Not compatible with Hygienic USIT® sealing washers and washers for dead space-free screw connections.
Datasheets(X)
 | |
Material | Stainless steel A4, 1.4404 |
Property class | 50 |
Surface | Plain |
Design | Polished Ra < 0,8 µm |
RoHS-compliant | Yes |
Area of application | For hygienic requirements |
Head type | Ball head |
Drive type | Two side |
Thread form | Standard metric thread |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 16 mm |
Head height (k1) | 5 mm |
Head diameter (dk) | 17 mm |
External drive (sw) | WS10 |
Radius (r1) | 10 |
Last viewed
Impact cap
90° angled cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
Hexagonal nut with clamping piece (all-metal) ISO 7042, steel 8, hot-dip galvanised (hdg)
Transition coupling
Machinist's hammer German design in accordance with DIN 1041
Ramti table connector
1/2" socket wrench insert Triple square, long
Tile adhesive CERAfix® 402-2 C2 TE Flex
Soft solder Lead-free in accordance with DIN EN ISO 9453
Round-headed strip nails, 21°