Hygienic design ball-head screw
Stainless steel 1.4404 polished hygienic design
SCR-HYGDESIGN-1.4404-WS6-POL-M4X8
Register now and access more than 125,000 products
- Optimum connection element for fastening panels
- Large head contact surface
- Visually appealing head geometry
- Easy to clean thanks to its polished surface
- Virtually no adhesion of dirt particles thanks to the extremely low surface roughness of < 0.8 µm
- Low distortion screwing in softer materials thanks to the large contact surface and the undercut on the threaded shank
Not compatible with Hygienic USIT® sealing washers and washers for dead space-free screw connections.
Datasheets(X)
 | |
Material | Stainless steel A4, 1.4404 |
Property class | 50 |
Surface | Plain |
Design | Polished Ra < 0,8 µm |
RoHS-compliant | Yes |
Area of application | For hygienic requirements |
Head type | Ball head |
Drive type | Two side |
Thread form | Standard metric thread |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 8 mm |
Head height (k1) | 2.9 mm |
Head diameter (dk) | 11 mm |
External drive (sw) | WS6 |
Radius (r1) | 6.7 |
Last viewed
Clamping sleeve PRINETO®
Hexagon nut, low profile with fine thread ISO 8675, steel 5, plain
Hexagonal bolt with shank
Bodywork double hook
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Spacer strip/rebar spacer
Work T-shirt Hakro 292
Stand-off installation AMO®-light
ABS anchor point spring toggle set
Bit holder with plug-in torque wrench head drive Stahlwille 736