I-Block 120 K ceiling panel
Ceiling panel I-Block 120 K
CEILPLT-(I-BLOCK-120-K)-100X55X26CM
Register now and access more than 125,000 products
- Partition system for partitioning electrical wires and flammable/non-flammable pipes as well as ventilation in accordance with DIN 18017-3 and DIN EN 15650
- Meets the requirements for increased acoustic insulation in accordance with DIN 4109 Sheet 2
- Formwork aid and temporary non-slip ceiling closure during the construction period
- Non-slip properties of I-Block 120 K (concreted, undrilled condition) are tested by the state inspection/supervision body in Villach
- Damaged areas, saw cuts, drill holes and cut edges must be touched up with ablative coating on both sides.
- General type approval aBG Z-19.53-2669
- Non-slip properties tested by the state inspection/supervision body in Villach No. 0222/19 HE/Ra
- Acoustic insulation test DIN EN ISO 10140 test certificate 91313 - 05
I-Block assembly scrap: Disposal in mixed construction waste containers (mixed construction/demolition waste) in accordance with Waste Catalogue Ordinance AVV No. 170904
For use in the [W3] I-Block 120 K combination floor penetration sealing system
Tested block size: L x W 1.0 m x 0.55 m
- Cut I-Block 120 K to the size of the planned ceiling cut-out
- Touch up damaged areas and cut edges with ablative coating
- Secure I-Block 120 K on the ceiling formwork (e.g. using binding wire on the reinforcement)
- Remove formwork after concrete casting
Length | 100 cm |
Width | 55 cm |
Thickness | 26 cm |
Datasheets(X)
Last viewed
Safety boots, S2
System assortment 8.4.1, screwdriver 18 pieces
Alternator combination insert 1/2"
Hexagon screw, type S/A4 — push-through installation DIN 933 A4 stainless steel, with washer, in accordance with DIN EN ISO 7089 (DIN 125), A4 stainless steel
Stand-off installation AMO®-light
Bow saw blade with raker toothing
Wood screw, DIN 96 A2 Half moon head with slot
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Low-cut safety shoes, S3
Locking system DUAL
