I-Block 90<SUP>®</SUP> ceiling panel - CEILPLT-(I-BLOCK)-100X55X30CM

I-Block 90^® ceiling panel

Name: I-Block 90 ® ceiling panel
Brand: Würth
SKU: 0893309330

I-Block 90 ceiling panel
CEILPLT-(I-BLOCK)-100X55X30CM

Art.-no. 0893309330

EAN 4061975321350

All versions

Similar products

Prices for customers after login

I-Block 90^® ceiling panel

Art.-no. 0893309330

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Partition system for sealing electrical wires and flammable/non-flammable pipes in the installation duct, as well as ventilation in accordance with DIN 18017-3

Meets the requirements for increased acoustic insulation in accordance with DIN 4109 Sheet 2

Formwork aid and temporary non-slip ceiling closure during the construction period

Notice

I-Block 90 step safety has been tested by Graz University of Technology in an undrilled state and embedded in concrete

Damage, saw cuts, drill holes and cut edges must be touched up with ablative coating on both sides.

General construction test certificate P-MPA-E-06-025

Step safety tested by the Graz University of Technology. Load capacity - statement inspection number 78.765/10

Noise insulation test DIN EN ISO 10140 test certificate 91313 - 05

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For use in system [W2]

Installation duct I-Block 90

The I-Block 90 installation duct can be used with duct wall structures in solid or lightweight construction.

The duct wall structures must independently meet the static requirements for use as installation ducts/walls. These requirements are described in DIN 1053 for solid construction and in DIN 4103 for lightweight construction.

An 18 mm plasterboard panel is required as the minimum thickness for lightweight construction cladding.

Tested block size: L x W 1.0 m x 0.55 m

Instructions

Cut I-Block 90 to the size of the planned ceiling cut-out.

Touch up damage and cut edges with ablative coating.

Secure I-Block 90 on the roof formwork (e.g. using binding wire on the reinforcement)

Remove formwork after concrete casting.

Length	100 cm
Width	55 cm
Thickness	30 cm

Additional accessory:

Product

Description

Quantity

Price
/PU

Ablative coating for I-Block 90®

Art.-no. A997501540

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).