Indexable insert, carbide DCMT (medium machining)
ISO M medium machining DC
INDEXAINRT-DCMT070208-MP-HC9125
Register now and access more than 125,000 products
- Positive cutting geometry
- Low cutting load thanks to sharp cutting edge and wide chip pockets
- Good chip control at high feed rates
Datasheets(X)
Longitudinal turning and facing with moderate infeeds
Material to be processed | Stainless steel |
Supply type | Medium finishing |
Material | Carbide |
ISO-Code Rotating | DCMT 070208 |
Chip breaker code | MP |
Carbide type ISO | M25 |
Carbide type | HC9125 |
Machining conditions for indexable insert | Medium |
Shape of indexable insert ISO | D |
Clearance angle of indexable insert ISO | C |
Tolerance class of indexable insert ISO | M |
Indexable insert type ISO | T |
Size of indexable insert ISO | 07 |
Thickness of indexable insert ISO | 02 |
Corner radius of indexable insert ISO | 08 |
Coating | CVD |
Carbide type area ISO | M |
Materials group | M (primary application) |
min./max. ap | 0.3-1.8 mm |
f min./max. | 0.08-0.22 mm/r |
Min./max. Vc in stainless steel | 190-230 m/min |
Last viewed
Label carrying system for identification rings
Sensor pad
Plain washers - large series ISO 7093-1 stainless steel A5 1.4571 plain
Shroud turnbuckle A4 stainless steel, closed
Countersink bit For 68 mm diameter hole saws
Flat connector Junior Power Timer (JPT) 2.8
Work poloshirt
UV protective fleece
Spirit level made of light metal
Safety boots, S3