Indexable insert cermet DNMG (finishing)
ISO P finishing DN
INDEXAINRT-DNMG150612-VB-HC3215
Art.-no. 5445611106
EAN 4065233021037
Register now and access more than 125,000 products
- Excellent chip control
- High service life thanks to three-dimensional chip breakers
- Low cutting resistance and high stiffness of the cutting edge
Compared with carbide, cermet as a cutting material has a better wear resistance and a lower propensity for the development of built-up edges in tough materials. Its self-sharpening wear pattern keeps cutting forces low even after long cutting times. In finishing operations, this prolongs the service life and enables the greatest possible dimensional stability and glossy surfaces.
Datasheets(X)
For universal use in longitudinal turning and facing as well as copy turning
Material to be processed | Steel |
Supply type | Smoothing |
Material | Carbide |
ISO-Code Rotating | DNMG 150612 |
Chip breaker code | VB |
Carbide type ISO | P15 |
Carbide type | HC3215 |
Machining conditions for indexable insert | Good |
Shape of indexable insert ISO | D |
Clearance angle of indexable insert ISO | N |
Tolerance class of indexable insert ISO | M |
Indexable insert type ISO | G |
Size of indexable insert ISO | 15 |
Thickness of indexable insert ISO | 06 |
Corner radius of indexable insert ISO | 12 |
Coating | CVD |
Carbide type area ISO | P |
Materials group | P (primary application) |
min./max. ap | 0.5-2.5 mm |
f min./max. | 0.2-0.5 mm/r |
Min./max. Vc in steel | 170-420 m/min |
Last viewed
Square file DIN 7261, shape D
Slotted flat-head screw DIN 85, steel 4.8, plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
16° circular collated nail with smooth shank
Stepped drill bit, spiral
16° circular collated nail with smooth shank
Additional function 3KS Plus
Aluminium telescopic shaft with water drain 1/2 inch to 3/4 inch hose connection
Detectable markings
Hexagon bolt with thread up to the head DIN 933, A4 stainless steel, plain