Indexable insert tungsten carbide WNMG (medium machining)
ISO N medium finishing WN
INDEXAINRT-WNMG060408-HA-HU01
Register now and access more than 125,000 products
- Highly positive rake
Datasheets(X)
Longitudinal turning and face turning for higher infeed
Material to be processed | Non-ferrous metal |
Supply type | Medium finishing |
Material | Carbide |
ISO-Code Rotating | WNMG 060408 |
Chip breaker code | HA |
Carbide type ISO | N10 |
Carbide type | HU01 |
Machining conditions for indexable insert | Medium |
Shape of indexable insert ISO | Trigon 80° |
Clearance angle of indexable insert ISO | N (0°) |
Tolerance class of indexable insert ISO | M |
Indexable insert type ISO | Type G (with hole, cylindrical, double-sided chip breaker) |
Size of indexable insert ISO | 06 |
Thickness of indexable insert ISO | 04 |
Corner radius of indexable insert ISO | 08 |
Carbide type area ISO | N |
Materials group | N (primary application) |
min./max. ap | 0.8-3.5 mm |
f min./max. | 0.1-0.4 mm/r |
Min./max. Vc in non-ferrous metals | 450-750 m/min |
Last viewed
Shelf support with mounting hole
Key, high profile DIN 6885, steel, plain, shape E
Stretch X pilot jacket
Softshell jacket Nitras Motion Tex Light 7156
Hexagonal nut, flat profile DIN 936, steel, plain
Twist drill bit HSCo DIN 340 type RN OXIDE
Safety boots, S3
TIPP® Smartlock GS pipe clamp Without rubber inserts
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A4 stainless steel
Steel spacer stud