Injectable mortar, WIT-VIZ Express - ANC-MORT-(WIT-VIZ EXPRESS)-330ML

Injectable mortar, WIT-VIZ Express - ANC-MORT-(WIT-VIZ EXPRESS)-330ML - 1

Injectable mortar, WIT-VIZ Express - ANC-MORT-(WIT-VIZ EXPRESS)-330ML - 2

Injectable mortar, WIT-VIZ Express

Name: Injectable mortar, WIT-VIZ Express
Brand: Würth
SKU: 0903420303

Chemical injection mortar WIT-VIZ EXPRESS
ANC-MORT-(WIT-VIZ EXPRESS)-330ML

Art.-no. 0903420303

EAN 4052712011351

All versions

Similar products

Prices for customers after login

Injectable mortar, WIT-VIZ Express

Art.-no. 0903420303

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Fast curing composite mortar for the injection systems W-VIZ (concrete) and W-VIZ dynamic (fatigue-related influences)

Fast curing

Cartridge can continue to be used until the best before date, by changing the mixer nozzle or resealing it with the end cap

Two-part reactive resin mortar, styrene-free vinylester

Individual fixing point in cracked and uncracked concrete: Anchor rod W-VIZ-A, internally threaded sleeve W-VIZ-IG

Earthquake C1 and C2 (W-VIZ-A M10 to M24)

Individual fixing point, dynamic: Anchor rod W-VIZ-A dyn. and W-VIZ-AV dyn.

Proof of Performance

European Technical Assessment ETA-04/0095: Individual fixing point + cracked and uncracked concrete (anchor rod W-VIZ-A, female thread anchor W-VIZ-IG)

European Technical Assessment ETA-18/0979: Retroactively installed fasteners in concrete under fatigue cyclic loading (anchor rod W-VIZ-A/S dynamic, W-VIZ-AV/S dynamic)

Application area

Fence systems

Tunnel ventilation (fatigue-related influences)

Post support bracket

Create the drill hole

From W-VIZ M10:

Make the drill hole with the Würth hollow drill bit. Hole cleaning can be dispensed with

Clean the drill hole

2x blow out, 2x mechanical brush out, 2x blow out

Blow out with compressed air from M20 drilled hole

Measure temperature

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Fill injection mortar starting from base of drill hole

Press in anchor rod up to drill hole base while turning slightly

Visual check of mortar filling quantity, setting depth marking

Observe the injection mortar curing time

Install component, apply installation torque

Create the drill hole

From W-VIZ M10:

Make the drill hole with the Würth hollow drill bit. Hole cleaning can be dispensed with

Clean the drill hole

2x blow out, 2x mechanical brush out, 2x blow out

Blow out with compressed air from M20 drilled hole

Measure temperature

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Fill injection mortar starting from base of drill hole

Push in female-thread anchor while turning slightly

Carry out visual check and comply with composite mortar hardening time

Remove extruded mortar and protective cap

Install component; maximum torque may not be exceeded

Create the drill hole

Clean drill hole (blow out 2 x, brush out mechanically 2 x, blow out 2 x), with M20 and larger, blow out with pneumatic air (pneumatic air nozzle)

Screw mixer onto cartridge

Before use, press out approx. 10 cm cord. Do not use this initial mortar!

Fill injection mortar starting from base of drill hole

Press in anchor rod up to drill hole base while turning slightly

Observe the injection mortar curing time

After the hardening time, remove extruded mortar

1. Apply installation torque

2. Screw on the locking nut, then tighten with a wrench ¼ to ½ a turn

European Technical Assessment ETA-04/0095: Individual fixing point + cracked and uncracked concrete (anchor rod W-VIZ-A, female thread anchor W-VIZ-IG)

European Technical Assessment ETA-18/0979: Retroactively installed fasteners in concrete under fatigue cyclic loading (anchor rod W-VIZ-A/S dynamic, W-VIZ-AV/S dynamic)

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

Anchor rod W-VIZ-A: Railings, metal structures and profiles, brackets, supports, steps, etc.

Female thread anchor W-VIZ-IG: Railings, metal structures and steps, etc.

Anchor rod W-VIZ-A dynamic: Slewing cranes, crane runways, ventilation fans, welding robots, conveyors, street signs, etc.

Type description	WIT-EXPRESS
Container	Coaxial cartridge
Contents	330 ml
Included in delivery	Mortar cartridge 330 ml (coaxial) + 1 x mixer nozzle
Suitable application gun	Battery-powered application gun 330ml, Application gun HandyMax, Application gun MULTI, Application gun WIT 330ml
Min./max. processing temperature /conditions	-5 to 30 °C / temperature in the anchorage ground during processing and hardening
Min./max. ambient temperature / Conditions	-40 to 120 °C / after completely curing process
Temperature resistance, long-term temperatures max.	72 °C
Temperature resistance, short-term temperatures max.	120 °C
Shelf life from production/conditions	18 Month / cool and dry storage area, 5°C to 25°C
Approval	ETA-04/0095, ETA-18/0979
Chemical basis	Vinylester, styrene free
Colour	Grey

Required accessory:

Product

Description

Quantity

Price
/PU

Cordless application gun WIT

APPLGUN-CORDL-ANC-WIT-M-KST-330ML

Art.-no. 0891003330

Powerful Li-ion battery-powered application gun for WIT cartridges

x 1 pcs

Application gun EasyMax

APPLGUN-ANC-EASYMAX-(F.WIT)-330ML

Art.-no. 0891007201

Manual application gun for WIT cartridges

x 1 pcs

Application gun WIT

APPLGUN-F.DWL-WIT-330ML

Art.-no. 0891003

For pressing out WIT cartridges (150 ml, 280 ml, 320 ml, 300 ml, 330 ml) and silicone cartridges

x 1 pcs

Application gun HandyMax

APPLGUN-ANC-HANDYMAX-(F.WIT)-310ML

Art.-no. 0891007

For pressing out WIT cartridges (150 ml, 320 ml, 330 ml)

x 1 pcs

FILL & CLEAN static mixer

MIX-DWL-PLA-WIT

Art.-no. 0903420001

For WIT cartridges of WIT-VM 250, WIT-VM 100, WIT-Nordic, WIT-Express, WIT-PM 200, WIT-EA 150 systems with cleaning element

x 10 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU