Injection adapter WIT-IA for ensuring that mortar-filled drill holes contain no air bubbles
Injector adapter WIT-IA
INJADAPT-RB-(WIT-IA16)-GREY-D19MM
Register now and access more than 125,000 products
Injection adapter WIT-IA, suitable injection systems:
- WIT-PE 500, REBAR: European Technical Approval ETA-07/0313
- WIT-PE 500, REBAR: General construction permit Z-21.8-1834
Datasheets(X)
Ensures that mortar-filled drill holes contain no air bubbles
Type description | WIT-IA |
Nominal drill hole diameter | 20 mm |
Suitable for rod diameter | 16 |
Suitable for tension anchor W-ZA | M16 |
Colour | Grey |
Suitable extension | WIT-MV 16 |
Outer diameter | 19 mm |
Last viewed
Hexagon nut with fine thread
Zinc clip-on wheel weight For car steel rims
Concealed drawer front for Vionaro frame system
Adjusting ring, type A
Cable feed device CPS 3
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
M-CUBE 2in1 ABS 18/APS 18 case set 5 pcs
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Taper-grooved dowel pin ISO 8745 steel plain
Low-cut safety shoes, S3