Injector-Ex injector solvent
Injector solvent Injector-EX
INJSOLV-(INJECTOR-EX)-250ML
Register now and access more than 125,000 products
Special product for loosening injectors and spark plugs in assemblies and engines
- Gentle, since seized connections are loosened without considerable force or tools
- Product can remain effective over an extended period, penetrate deeply and thus ensure optimal work results
KENA® microfluid technology
- Very good creeping properties allow deep penetration of the product
- Even injectors and spark plugs with significant carbon build up are loosened efficiently
- Slow flash-off strengthens the effect, the rust is converted and carbon deposits dissolved
- Very economical to use
Remove excess material or splashes immediately from sensitive and painted surfaces using a damp cloth. When diluted with water, the product loses its intense cleaning effect.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Special product for loosening rusted and oxidised injection nozzles, injectors and spark plugs in engines and assemblies.
Contents | 250 ml |
Colour | Colourless |
Smell/fragrance | Fruity |
Chemical basis | Surfactants, ester |
Shelf life from production | 24 Month |
Density | 0.843 g/cm³ |
Density conditions | at 20°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Tungsten carbide bur with MX teeth
Safety shoe S3 Jalas 9568
Solid carbide end mill With Speedcut Universal corner radius, extra-long XXL, optional, four cutting edges, uneven angle of twist gradient
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Grooved taper-pin ISO 8744 steel plain
Countersunk head screw with nib and nut
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Adapters 10 mm x 1/4 inch
Manual screw tap, third tap Ruko hand tap HSS DIN 352 Whitworth BSW third tap
Professional timber construction set 39,602 pieces