Insert, tapered sealing EN1254, gunmetal, 3381
EN1254 gunmetal 3381
FITT-INRT-EN1254-IT-GM-1/2X1IN-3381
Register now and access more than 125,000 products
- For universal use in various applications
- Conforms to many different international certification systems such as DVGW, KIWA and SVGW
The suitability for drinking water is confirmed by DVGW type examination certificate DV-7401AS2289 and by ÜA registration certificate no. R-15.2.3-20-17025.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Compressed air
- Equipment for the distribution of technical gases
- Rainwater harvesting systems DIN 1989
- Fire-extinguishing pipes DIN 14462
- Sprinkler systems VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 1/2 in |
Nominal diameter 2 | 1 in |
Length (a) | 27 mm |
Connection thread | R 1/2 x 1 inch |
Connection type | 1. connection cylindrical female thread (R) |
Width across flats (S/S1) | 0 - not applicable |
Width across flats 2 (S2) | 0 - not applicable |
Material | Red bronze - gunmetal |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
Steel nail with deep countersunk head and discontinuous longitudinal corrugation
Diamond cutting disc, joint cutter
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
Metal tap With 3/4 inch connection for 60 l metal drums
Paint mixing cup
Jacket
Hexagon head bolt With thin shaft in hygienic design
Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Paint spray, high gloss