Insert, tapered sealing EN1254, red brass, 4381
EN1254 gunmetal 4381
FITT-INRTPC-1254-ILE-RB-54X2 1/2IN-4381
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar collectors
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Compressed air
- Equipment for the distribution of technical and medical gases
- Rainwater harvesting systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 54 mm |
Nominal diameter 2 | 2-1/2 in |
Length (a) | 45 mm |
Connection thread | G 2 1/2 inch |
Connection type | 1. connection internal soldering |
Width across flats (S/S1) | 0 - not applicable |
Material | Red bronze - gunmetal |
Surface | Plain |
Last viewed
FKM 80 Shore O-ring ISO 3601-1
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Ducting clamp DIN3015-2, heavy-duty series, ribbed inner surface, W.TEC series
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon socket threaded plug with collar, inch Steel, zinc-nickel-plated silver (ZNSHL), NBR sealing ring
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
V-belt spray
Drill chuck key
Deep-hole marker set For marking where access is restricted